RB iconIP iconMPE iconRBAS iconRouse icon
Mascus LogoВсе категории
Разместите!

Toro STX26

Цена без НДС

Compnay LOGO
Images5
Toro STX26 Машины для измельчения пней
Toro STX26 Машины для измельчения пней
Toro STX26 Машины для измельчения пней
FavoriteИзбранное
shareПоделиться
Save searchСохранить поиск
Распечатать

INFO

Тип машины
Машины для измельчения пней
Марка / модель
Toro STX26
Город
Fontana, California
Страна местонахождения
Америка
Mascus ID
FF99E594

ЦЕНА

Выбор валюты

ПОДРОБНОСТИ

Складской номер
2021041
Страна производства
Америка
Прочая информация
Toro STX-26 Walk Behind Stump Grinder, Gas Engine, Intelli-Sweep System, Rubber Tracks, Hydraulic Driven Cutting Wheel, 19" Cutting Wheet with 12 Teeth, 12.5" Cutting Depth, Low 754 Hours, Excellent Condition! Track Design • Allows for zero turn capability • Provides a low center of gravity and large footprint • Increased stability on side hills • Eliminates tire ruts and flat tires • Operates in wet & soft ground conditions. Full Hydraulic Operation • Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches • No need to replace expensive cogged pulleys • No worry of customers engaging grinder head at full throttle • Eliminate shock loads to the engine by belts slipping or head stopping Traction Controls Easy-to-use control system offers smooth operation and fewer lever/nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions. 1) Left/right traction control (forward, reverse, turn) 2) Sweep, lift/lower and engagement of grinder head. Offset Cutting Head • Provides operator with excellent visibility to stump • Allows full rotation perpendicular to machine Custom Trailer Easy to load on any trailer, including Toro's custom TRX trailer with an easy-to-use, built-in securing system. No need for straps or tie-downs. Tailgate design is safer and makes it easier to load than tilt-bed trailers. Trailer features highway rated tires. Specifications •Cutting Depth: 12.5" below grade •Cutting Wheel: 19" diameter to tooth; 3/4" thick, 12 green teeth •Cutting Height: 35" above grade •Head Swing: 47" Arc •Hydraulic Flow: 13.5 gpm hydraulic flow to head •Engine: Kawasaki 730V Twin Cylinder •Dimensions: 34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H •Weight: 1200 lbs. (545 kg) •34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) HПоказать все...

ReQuip Corporation

16516 Washington Dr 92335 Fontana California Америка
Получить уведомление по электронной почте
Показать все объявления ReQuip Corporation
report adСообщить о подозрительном объявлении