Case 836 C AWD

CASE 836C AWD Price: €195,500 net Year of manufacture: 2024 Operating hours: ONLY 18 hours Weight: 12,800 kg 6-cylinder engine with an output of 119 kW MANUFACTURER’S WARRANTY: 12 MONTHS OR 2,000 OPERATING HOURS Technical specifications for the CASE 836C (AWD) motor grader Drivetrain: NEF diesel engine, 6-cylinder, type FPT F67 NEF STAGE V, common rail, turbocharged with intercooler, 6.7 L displacement; complies with the latest Stage V emission standards; features the patented "Hi-eSCR2" selective catalytic reduction system using AdBlue. Power in gears 1–3: 102 kW (138 hp) per ISO 14396/ECE R120 standards. Power in gears 4–6: 115 kW (156 hp) per ISO 14396/ECE R120 standards. Torque: 725 Nm at 1,400 rpm. Full PowerShift transmission, allowing for gear changes under load. Forward gears: 6 (max. speed = 39.9 km/h). Reverse gears: 3 (max. speed = 29.2 km/h). Torque converter with a 1.87:1 ratio. Tractive force: 85 kN. Hydraulic system: ▪ Variable-displacement multi-piston pump, max. flow rate 94.5 l/min; ▪ A closed-circuit "load sensing" system with a pressure of 200 bar ensures high operational precision; ▪ System capacity – 185 l; Drive system – all-wheel drive: Hydrostatic front-wheel drive with an E.D.C.V. (Electronic Drive Control Volume) system, which supplements the hydrodynamic rear-wheel drive. A bi-directional pump controls the motors located in the front wheel hubs. A "No-Spin" hydraulic differential regulates torque and prevents wheel slippage. A microprocessor monitors and adjusts the drive force distribution between the front and rear wheels. A stepless control allows the operator to adjust the front-wheel tractive effort to suit current operating conditions. A "creep" mode is included as standard, utilizing only the front-wheel drive to maintain very low travel speeds. ▪ Hydraulically operated steering system; ▪ Turning radius (measured at the outer edge of the wheels) – 6.6 m; ▪ Six equal-sized wheels with 405/70 R20 tires; ▪ Wet-disc braking system acting on the four rear wheels; ▪ Driven front axle (6WD): ▪ Hydrostatic front-wheel drive, managed by an electronic system (EDCV) that regulates rotational speed; Axle oscillation – ± 15°; Wheel tilt – ± 21.45°; Steering angle (left/right) – ± 40°; Frame articulation – ± 28°; Ground clearance – 0.485 m; ▪ Tandem rear axle: Axle oscillation – ± 15°; Automatic "No-Spin" differential lock; 4-wheel drive transmission via chains; ▪ Operating weight – 12,800 kg; ▪ Height – 3.24 m; ▪ Max. length – 8.961 m; ▪ Width – 2.36 m (across tires); Additional equipment included in the machine price: ▪ Heated FOPS/ROPS cab with air conditioning, ▪ Comfortable, heated, air-suspended operator seat, ▪ All-wheel drive (AWD) 6x6, ▪ Front parallel blade, ▪ Mid-mounted blade (3355 mm wide, 522 mm high) with float function, ▪ 5-shank rear ripper, ▪ Reversing alarm, ▪ Road lighting for public road use, ▪ LED work lights, ▪ Amber warning beacon, ▪ Reversing camera. Price: €195,500 net